All Axygen Snaplock Microtubes have frosted cap surfaces for labeling, frosted panels on the side for writing, and a piercing port in the center of the cap. They will withstand up to 14,000 RCF. Snaplock cap assures efficient seal and the thin membrane in cap center allows easy access to sample by syringe needle.
Axygen® 1.5 mL MaxyClear Microtubes have frosted cap surfaces for labeling, frosted panels on the side for writing, and a piercing port in the center of the cap. They will withstand up to 14,000 RCF. The snaplock cap assures efficient seal and the thin membrane in cap center allows easy access to sample by syringe needle.
These 5mL MacroTubes® scale up the conveniences of standard 1.5mL tubes for larger volumes. These polypropylene tubes come with an attached cap that provides a tight, leak proof seal, and can also be opened (or closed) with one hand. The cap is designed to provide a secure seal from -86°C to +80°C. They have the same diameter as standard 15 mL tubes for compatibility with centrifuge rotors, etc. In many applications, they have replaced 15 mL tubes, reducing plastic waste, storage space and shipping costs. Contamination of pipettor shafts can be eliminated because the tube length is short enough for standard 1 mL and/or 5 mL tips to reach the tube's conical bottom.
These microtubes are made of pure copolymer polypropylene. Etched writing surface for easy labeling; 100µL graduations for easy reference. RNase/DNase Pyrogen-Free and fully autoclavable.
500 per pack.
These tubes have all the fine features of the T330-7 series, but they also incorporates a convenient pick-up tabs for easier handling without actually touching the tube. Certified RNase-, DNase-, Pyrogen- and DNA-free.
Uniform wall thickness makes these precision-molded polypropylene tubes withstand forces as high as 17, 000 x g. Snap-seal closure provides a leak-tight yet easy-to-open seal. Pierceable cap allows samples to be easily removed with a syringe. Other features include frosted flat top, marking spot, and sharp, frosted graduations.
The MaxyClear Snaplock Microcentrifuge Tubes all have a frosted cap surface for labeling and frosted panels on the sides for writing. They also include a piercing port in the center of the cap. These 99.9%-pure virgin polypropylene microtubes are manufactured using highly polished molds for clarity. Large writing surface and cap surface for easy labeling; 100µL graduations for reference. Maxymum Recovery available for critical molecular samples.
Empty
Empty
5 mL Clear Macrocentrifuge Tube - 100/Pack
Axygen® 2.0mL MaxyClear Microtubes are available in a variety of colors, sterile, and Maxymum Recovery®. All Axygen Snaplock Microtubes have frosted cap surfaces for labeling, frosted panels on the side for writing, and a piercing port in the center of the cap.
Microtube, 2mL, Attached Screw Cap w/O- ring, Sterile, PP, 1000/cs
The washer seal secured in the top of the cap ensures a positive leakproof seal, time after time, keeping the integrity of small samples under even the most adverse conditions. This series of tubes is available either plain or with printed graduations and white marking area for sample identification. Caps are supplied with attachment loops, and allow them to remain attached to the tube in order to prevent mix-up and contamination. These microcentrifuge tubes have all the other fine features stated in the general description. Perfect for cryogenic work. Non skirted tubes can be centrifuged up to 20,000g. Skirted tubes can be centrifuged up to 17,000g. Will withstand temperatures from -196 °C to +121 °C.
Tubes and caps in the Micrewtube® Family are certified RNase, DNase, DNA and Pyrogen free.
Micro Centrifuge Tube 2.0ml Graduated Mi xed Colors 500/pk 5000/cs
Centrifuge Tube Micro 1.5ml Flat Top Gra duated Mixed Colors 500/pk
Axygen® 2.0mL MaxyClear Microtubes are available in a variety of colors, sterile, and Maxymum Recovery®. All Axygen Snaplock Microtubes have frosted cap surfaces for labeling, frosted panels on the side for writing, and a piercing port in the center of the cap.
All products are manufactured from the finest raw materials using precise production techniques that provide consistent quality performance. All primary products are made from virgin polymers and contain no recycled, reprocessed, or altered plastics that might introduce contamination or defects.
Every lot of each product can be traced to the corresponding raw materials and production date. In addition to continual in-process control monitoring, all product lots are sampled after packaging and tested in our quality control laboratory as well as independent laboratories. The result is a contaminant-free product of highest quality.
The following lot specific certifications are now available for download:
Your message has successfully been sent. We will respond back soon
Email entered was invalid.
Name, Email, and your message are all required
On Thursday, May 2nd, we will be implementing a new phone system. During this time our system will be completely down. Please contact us at [email protected] and we will get back to you as soon as possible.