33 Products found
Result 1- 24 of 33
Multiple Options

Bead beater ideal for lysing, extraction, or homogenization applications, utilizing an aggressive vertical mixing motion. Supplied with holders to hold vertically 12 microtubes (1.5 or 2.0ml), 6 15ml tubes, or 3 50ml tubes, and 12 microtubes (1.5 or 2.0ml) horizontally. Beads are also available and sold separately for complete bead beating solution. The Bead Genie, built in the USA, is compact compared to most bead beaters and homogenizers, yet heavy and durable.

  • Supplied with 4 Tube Holders – 12 x 1.5 / 2.0ml (vertical and horizontal), 6 x 15ml and 3 x 50ml
  • Made in the USA
  • Speed – 500 – 4800 strokes per minute (250 – 2400 RPM)
  • Motion – 19mm (Vertical)
  • Pulse ON/OFF – 1 sec – 99 minutes
  • Timer – 1 sec – 99 minutes or continuous
  • Dimensions (D x W x H) – 165 x 122 x 330 mm (6.5 x 4.8 x 13in.)
  • Markings/Warranty – CE/2 Years


Multiple Options

A wide range of snap-on attachments for the Vortex-Genie® 2 and Vortex-Genie® 2T greatly expands these units™ usability. Each attachment is designed to produce its own unique mixing action, allowing the operator to choose the correct mixing action for any application. These attachments are made in various shapes and sizes and of various materials to accommodate almost all common tubes and containers.

*Multiple Sample Starter Set includes:
(1) 6" Platform, (1) 60-Microtubes Foam Insert, (1) Microplate Foam Insert.

**Large Sample Set includes:
(1) Recessed Platform, (2) Elastic Bands, (1) 9-16mm Tubes Insert,
(1) 14-29mm Tubes Insert, (1) 29-37mm Tubes Insert, (1) Blank Insert.


Multiple Options

The Vortex-Genie 2T offers all the same features as the Vortex-Genie 2, including variable speed control, (which provides a range of operation from slow-speed shaking up to high-speed vortexing), and a multiple-position power switch that allows the operator to choose Touch On control or the Hands-Free continuous operation of the switch-activated start/stop mode. The Vortex-Genie 2T adds an integral timer: 1 to 60 seconds in the Touch On mode, 1 to 60 minutes in the Hands-Free mode. Action shuts off automatically after a set time in both modes. Unit can also be set to run continuously. Vortexing time is constant, with an accuracy of ±5% and a ±1% repeatability.

As with the Vortex-Genie 2, a wide range of attachments of various shapes, sizes and materials, each with its own mixing action, is available to allow the operator to mix almost all common tubes and containers with the correct mixing action for any application. The tough metal rubber-footed housing provides a stable platform that will not walk across your benchtop. Includes a 3-diameter (7.6cm) platform and a Pop-Off Cup. Base dimensions: 6.5L x 4.8W x 6.5H (165 x 122 x 165mm). Weight: 8.8 lbs (4kg). 120VAC, 60Hz, 0.65 amps. Two-year manufacturer™s warranty. ETL listed, conforms to UL standard 3101-1.

See: Vortex-Genie Accessories.


Multiple Options

The Vortex-Genie 2® features variable speed control, providing a range of operation from slow-speed shaking up to high-speed vortexing. The three-position power switch allows the operator to choose Touch On control or the hands-free operation of continuous action, greatly increasing lab efficiency.

A wide range of attachments of various shapes, sizes and materials, each with its own mixing action, allows the operator to mix almost all common tubes and containers with the correct mixing action for any application. The tough metal rubber-footed housing provides a stable platform that will not walk across your benchtop. Includes a 3-diameter (7.6cm) platform and a Pop-Off Cup. Base dimensions: 6.5L x 4.8W x 6.5H (165 x 122 x 165mm). Weight: 8.8 lbs (4kg). 120VAC, 60Hz, 0.65 amps. Two-year manufacturer™s warranty. UL listed, CSA approved.

See Vortex-Genie® Accessories.


Multiple Options

The very affordable Vortex-Genie 1 provides violent high-speed vortexing action for touch mixing. Single high speed eliminates operator variability. Enhanced vortexing ability increases efficiency, reducing vortexing time. Comes with Pop-Off Cup. Optional 3-diameter (7.6cm) platform attachment accommodates beakers, flasks or multiple tubes.

Highly stable on rubber feet, the Vortex-Genie 1 will not walk across your benchtop. Solid cast-metal base and stainless steel construction provide years of reliable service. Base dimensions: 6.5L x 4.8W x 6.5H (165 x 122 x 165mm). Weight: 8.8 lbs (4kg). 120VAC, 60Hz, 0.65 amps. Two-year manufacturer™s warranty. ETL listed.

See: Vortex-Genie Accessories.


Multiple Options

The Disruptor Genie Cell Disrupter is ideal for any application that requires extremely violent high-speed agitation, such as difficult glass bead procedures, cell disruptions or homogenizations of yeast cells, bacteria, plant and animal tissue. The multidirectional action agitates and vortexes simultaneously at high speed, producing greater yields in less time. The Disrupter Genie is simple to use. Just set the auto-off timer from 0 to 15 minutes, or set it to run continuously. The single high-speed agitation eliminates operator variability.

Accommodates up to twelve 1.5mL snap-top microcentrifuge tubes. An optional holder accepts twelve 2.0mL screw top microcentrifuge tubes (see above). Or remove the microtube holder and snap on the Pop-Off Cup (included) for the high-speed vortexing of single test tubes. Enhance the performance of the unit with the use of soda-lime glass Disruptor Beads (sold separately). The Disruptor Genie is suitable for cold room or incubator use. Highly stable on rubber feet, it will not walk across your benchtop. Solid cast-metal base and stainless steel construction provide years of reliable service. Base dimensions: 6.5L x 4.8W x 7.5H (165 x 122 x 190mm). Weight: 9.5 lbs (4.3kg). Two-year manufacturer™s warranty. ETL listed. (120V, 60Hz, 0.65 amps)


# 0K-0236-408

This kit contains the Bottom Closure with Feet and (4) Screws. The Bottom Closure can be easily installed using either a 1/4" nut driver or pliers. Will fit onto Vortex-Genie 1, Vortex-Genie Pulse, Disruptor Genie, and Vortex-Genie 2 Family of mixers.


# S16-070

Magnetic Bag Mounting Strips, 16/Pk


# S16-069

Clip Plate for 3 Each 28-30mm Tubes


# S16-068

Clip Plate for 6 Each 15-17mm Tubes


# S16-067

Clip Plate for 12 Each 10-13mm Tubes


# S16-066

Clip Plate for 3 Each 28-30mm Tubes, 6/P k


# S16-065

Clip Plate for 6 Each 15-17mm Tubes, 6/P k


# S16-064

Clip Plate for 12 Each 10-13mm Tubes, 6/ Pk


# S16-063

The 3-D Orbital Shaker Attachment for the Roto-Shake Genie provides gentle yet thorough mixing of dishes, flasks, beakers and open containers. It moves at a 5 degree angle through a 360 degree rotation (providing a combination of vertical and horizontal motions). This means that every corner or crevice of a container will receive complete mixing, making it the perfect choice for applications such as gel and blot staining/blocking, sample washing, polymer resin preparation, and more. Please note, platform capacity is 1 Kg (2.2 lb).


# C91-245

Metal clip plate to accommodate up to 4 100-ml Volumetric Flasks. This can be attached to the Magnetic Platform for use with the Roto-Shake Genie, Rotator Genie, Enviro-Genie or Incubator-Genie.


# C91-244

Plastic box with hinged lid holds up to (100) 1.5ml or 2.0ml microtubes. A maximum of 4 boxes, 2 per side, can be attached to the Magnetic Platform for use with the Roto-Shake Genie, Enviro-Genie or Incubator-Genie. A maximum of 8 boxes, 4 per side can be attached to the Magnetic Platform for use with the Rotator Genie.


# C91-243

Pack of 2 clip plates with two elastic bands each for use with odd-shapped sample vessels. This can be attached to the Magnetic Platform for use with the Roto-Shake Genie, Rotator Genie, Enviro-Genie or Incubator-Genie.


# C91-242

Serial Cable may be used to connect the Enviro-Genie to a computer via a serial port for data capture or programming. It is a standard 9-pin, female to female straight through serial cable.


# C91-241

Stackable Wire Rack may be used in the Enviro-Genie and the Incubator-Genie to increase shelf space for use as a temperature controlled chamber. This is included in the Enviro-Genie and the Incubator-Genie. Two wire racks will fit inside the chamber to provide 3 levels for containers


# C91-239

Two stainless steel Trays and 24 magnetic Bag Mounting Strips used to attach sealed bags to the Magnetic Platform (Part No. 0A-1100-030) for use with the Roto-Shake Genie,Enviro-Genie or Incubator-Genie for increased bag capacity.


# C91-238

This pack of 16 stainless steel bag mounting strips is used to attach the Magnetic Platform for use with the Roto-Shake Genie, Rotator Genie, Enviro-Genie or Incubator-Genie. Four Bag Mounting Strips are included in the Roto-Shake Genie, Enviro-Genie and the Incubator-Genie.


# C91-237

This pack of 6 metal clip plates will accommodate up to 3 tubes with a diameter of 28-30mm. A maximum of 8 clip plates, 4 per side, may be attached to the Magnetic Platform for use with the Roto-Shake Genie, Enviro-Genie or Incubator-Genie. A maximum of 12 clip plates, 6 per side, may be attached to the Magnetic Platform for use with the Rotator Genie.


# C91-236

One metal clip plate to accommodate up to 3 tubes with a diameter of 28-30mm. A maximum of 8 clip plates, 4 per side, may be attached to the Magnetic Platform for use with the Roto-Shake Genie, Enviro-Genie or Incubator-Genie. This attachment is included in the Roto-Shake Genie, Enviro-Genie and the Incubator-Genie. A maximum of 12 clip plates, 6 per side, may be attached to the Magnetic Platform for use with the Rotator Genie.