Free Shipping on Orders Over $149 For a Limited Time! *Restrictions apply
Precut chemically inert labels made of polyvinyl and a strong adhesive that adheres to plastics, metals, and glass. Withstands temperatures of -321°F to 302° (-196°C to 150°C) or 212°F (100°C) in waterbaths. Resists most detergents, oils, organic solvents, and caustic agents without peeling or becoming brittle. 1000 per roll.
Fits a variety of bottles, flasks, beakers and other laboratory containers|*A build-up of liquid water on the label surface will dissolve the material.
Label and adhesive completely dissolve in any water temperature in under 30 seconds
Thermal Transfer Labels for Storage in Temperatures from 150°C to -40°C|For Use with Thermal Transfer Printers
Tough-Tags® are chemically inert polyester labels that strongly adhere to all plastics and other materials. They are temperature resistant from -40°F to 250°F (-40°C to 121°C). These labels will withstand autoclaving, boiling water baths, freezer temperatures, organic solvents, caustic agents and other challenges without peeling, cracking or falling off. For best adhesion it is recommended that siliconized surfaces be avoided.
Tough-Tags® are precut, peel-off labels which accept any marking instrument and are perfectly sized to fit microcentrifuge tubes and other containers in the laboratory. Tubes with Tough-Tags® wrapped around them will still slide easily in and out of rotors without binding because the labels are thin and the adhesive does not migrate from behind the label even after boiling and autoclaving.
Our label sheets are specially designed to permanently accept laser printing.
Our patented Cryo-Babies® and Cryo-Tags® withstand both long term cryogenic storage conditions and conventional freezer storage. These labels are chemically inert with a solvent resistant adhesive that will adhere to croygenic vials, microtubes, test tubes, glass vials, beakers and metal racks. Cryo-Babies® and Cryo-Tags® also withstand flash/snap freezing in liquid nitrogen, boiling water baths at 100°C and dry heat up to 150°C.
Perfect for easy sample identification and storage!
DuraSeal the durable, heat and solvent-resistant stretch film, has substantial advantages over common laboratory stretch films. Its™ superior heat-resistant feature allows for containers to be incubated in boiling water baths without suffering the characteristic melting of parraffin-based alternatives. Since DuraSeal is polyethylene based and free of any adhesives, it resists essentially all caustic agents and organic solvents.
DuraSeal is easy to use. There is no interleaf paper to strip away, just stretch the film symmetrically over a container opening and the 1.5mil thick film contracts inwardly around the opening or neck of the container to provide a drum-tight, water-proof seal. The film can be elongated 500-800% before breakage, minimizing the incidence of tearing during stretch sealing. The film clings to itself, especially after stretching so the free edges of the film may be stretched around the container to secure the container edges. Permeablility Information: Oxygen = 125cc/100in2/24hrs at 23°C Carbon Dioxide = 1300cc/100in2/24hrs at 23°C Water Vapor = 1.0g/100in2/24hrs at 38°C and 90% R.H.
Unique solvent-resistant, acrylic-based adhesive provides excellent cold temperature performance.
Specially coated for use with a resin ribbon that provides the best performance under extreme conditions.
Resists Degradation from scuffing, chemicals, moisture and wide temperature fluctuations.
Print as little as one label at a time, eliminating label waste and saving time and money.
Print crisp, clear, professional quality labels.
Our patented Cryo-Clear Laser Labels withstand conventional and cryogenic storage conditions (vapor and liquid phase nitrogen storage at -196 °C). The labels are chemically inert with a solvent resistant acrylic adhesive that will adhere to all plastics, glass and metal. Cryo-Clear Laser Labels will withstand dry heat up to 70 °C without cracking, peeling or degrading.
Cryo-Clear Laser Labels resist most detergents and oils, as well as many organic solvents, caustic agents and other challenges without peeling. They will resist water soaking for at least 24 hours at room temperature and water vapor (100% relative humidity) at 35°C for at least 24 hours.
Direct Thermal Cryo-Tags® are formatted to easily work with the Dymo® Labelwriter®, but also work with most direct thermal printers. Quickly label your samples with sharp text, clear barcodes or a combination of both!
Direct Thermal Cryo-Tags® are formatted to easily work with the Dymo® Labelwriter®, but also work with most direct thermal printers. Quickly label your samples with sharp text, clear barcodes or a combination of both!
Our label sheets are specially designed to permanently accept laser printing.
Our patented Cryo-Babies® and Cryo-Tags® withstand both long term cryogenic storage conditions and conventional freezer storage. These labels are chemically inert with a solvent resistant adhesive that will adhere to croygenic vials, microtubes, test tubes, glass vials, beakers and metal racks. Cryo-Babies® and Cryo-Tags® also withstand flash/snap freezing in liquid nitrogen, boiling water baths at 100°C and dry heat up to 150°C.
Perfect for easy sample identification and storage!
Our label sheets are specially designed to permanently accept laser printing.
Our patented Cryo-Babies® and Cryo-Tags® withstand both long term cryogenic storage conditions and conventional freezer storage. These labels are chemically inert with a solvent resistant adhesive that will adhere to croygenic vials, microtubes, test tubes, glass vials, beakers and metal racks. Cryo-Babies® and Cryo-Tags® also withstand flash/snap freezing in liquid nitrogen, boiling water baths at 100°C and dry heat up to 150°C.
Perfect for easy sample identification and storage!
Our label sheets are specially designed to permanently accept laser printing.
Our patented Cryo-Babies® and Cryo-Tags® withstand both long term cryogenic storage conditions and conventional freezer storage. These labels are chemically inert with a solvent resistant adhesive that will adhere to croygenic vials, microtubes, test tubes, glass vials, beakers and metal racks. Cryo-Babies® and Cryo-Tags® also withstand flash/snap freezing in liquid nitrogen, boiling water baths at 100°C and dry heat up to 150°C.
Perfect for easy sample identification and storage!
Direct Thermal Cryo-Tags® are formatted to easily work with the Dymo® Labelwriter®, but also work with most direct thermal printers. Quickly label your samples with sharp text, clear barcodes or a combination of both!
Direct Thermal Cryo-Tags® are formatted to easily work with the Dymo® Labelwriter®, but also work with most direct thermal printers. Quickly label your samples with sharp text, clear barcodes or a combination of both!
Direct Thermal Cryo-Tags® are formatted to easily work with the Dymo® Labelwriter®, but also work with most direct thermal printers. Quickly label your samples with sharp text, clear barcodes or a combination of both!
Our label sheets are specially designed to permanently accept laser printing.
Our patented Cryo-Babies® and Cryo-Tags® withstand both long term cryogenic storage conditions and conventional freezer storage. These labels are chemically inert with a solvent resistant adhesive that will adhere to croygenic vials, microtubes, test tubes, glass vials, beakers and metal racks. Cryo-Babies® and Cryo-Tags® also withstand flash/snap freezing in liquid nitrogen, boiling water baths at 100°C and dry heat up to 150°C.
Perfect for easy sample identification and storage!
Our label sheets are specially designed to permanently accept laser printing.
Our patented Cryo-Babies® and Cryo-Tags® withstand both long term cryogenic storage conditions and conventional freezer storage. These labels are chemically inert with a solvent resistant adhesive that will adhere to croygenic vials, microtubes, test tubes, glass vials, beakers and metal racks. Cryo-Babies® and Cryo-Tags® also withstand flash/snap freezing in liquid nitrogen, boiling water baths at 100°C and dry heat up to 150°C.
Perfect for easy sample identification and storage!
Our label sheets are specially designed to permanently accept laser printing.
Our patented Cryo-Babies® and Cryo-Tags® withstand both long term cryogenic storage conditions and conventional freezer storage. These labels are chemically inert with a solvent resistant adhesive that will adhere to croygenic vials, microtubes, test tubes, glass vials, beakers and metal racks. Cryo-Babies® and Cryo-Tags® also withstand flash/snap freezing in liquid nitrogen, boiling water baths at 100°C and dry heat up to 150°C.
Perfect for easy sample identification and storage!
Tough-Spots® are chemically inert and flexible white and colored polyolefin labels that adhere to most plastics (best performance with virgin polypropylene) as well as glass and metals. These labels withstand temperatures from -320°F to +212°F (-196°C to +100°C) (vapor and liquid-phase nitrogen storage, up to moderate oven temperatures) and can endure sustained humidity and soaking, submersion in boiling water baths, autoclaving, organic solvents, caustic agents and other challenges without peeling, degrading or becoming brittle.
Tough-Spots® will accept any marking instrument. Just write or print from a laser printer (instructions included for printing from Microsoft Word), peel back the label and affix to the top or side of a microtube or cryovial. Rainbow packs are available for laser sheets, and consist of four sheets of each of the following colors: blue, green, orange, red, and yellow (20 total sheets). Laser sheets are polyolefin, roll label stock is polyvinyl.
Our label sheets are specially designed to permanently accept laser printing.
Our patented Cryo-Babies® and Cryo-Tags® withstand both long term cryogenic storage conditions and conventional freezer storage. These labels are chemically inert with a solvent resistant adhesive that will adhere to croygenic vials, microtubes, test tubes, glass vials, beakers and metal racks. Cryo-Babies® and Cryo-Tags® also withstand flash/snap freezing in liquid nitrogen, boiling water baths at 100°C and dry heat up to 150°C.
Perfect for easy sample identification and storage!
Your message has successfully been sent. We will respond back soon
Email entered was invalid.
Name, Email, and your message are all required
On Thursday, May 2nd, we will be implementing a new phone system. During this time our system will be completely down. Please contact us at info@labsource.com and we will get back to you as soon as possible.
