7 Products found
Result 1- 7 of 7
Multiple Options

Safely and securely store a biohazard bag on the stainless steel wire frame of the Clavies® Biohazard Bag Holder. The frame is attached to a durable polypropylene bottom which also serves as a containment tray in the event of bag leakage. The safety orange color of the tray allows for quick and easy identification as a biohazard containment system. Autoclavable at 250°F (121°C) to maintain sterility. The small bag holder is intended for benchtop use.


Multiple Options

The convenient, plastic Clavies® Bag Sealing Clips fasten to the top of an autoclave bag once it is filled with waste materials. They securely fasten around the bag neck, but also let the bag release pressure which can occur during the autoclave process. Intended for use on bags ranging from 12 x 24" (30 x 61cm) to 19 x 23" (48 x 58cm). Closed internal dimension of 7/16" (11mm).


Multiple Options

Sturdy wire holder keeps biohazard bags open while a separate hooked ring resting overtop keeps bags securely held and in place.

  • Bright biohazard orange color
  • Epoxy coated steel wire
  • Chemical and corrosion resistant: Organic solvents, salts, weak acids and weak alkalis do not affect holder
  • Withstands a temperature range of -223 degrees C to 121 degrees C
  • Autoclavable


Multiple Options

Twist Ties are made of soft copper-tinned annealed iron wire sealed in extruded virgin vinyl. Simply cut the length you need and twist the ends together. These indispensable ties are strong and convenient for bag closures and bundling hard to handle items such as rods, wires and tubes.

Roll measures 1500™ (457.2m).


Multiple Options

LABPLAS® individual work station is made of highly resistant and transparent polycarbonate. Perfectly designed to maintain 400-series blender sample bags in a vertical and open position, simplifying dilution and aliquot collection.


Multiple Options

Closure clips can be used to temporarily close the bag and store the sample. Individual bag closing mechanism is used to create a leakproof seal when storing or transporting processed samples. Available in three sizes for blender 80, 400 and 3500 series bags.


Multiple Options

LABRACK® is designed to store up to ten 400-series blender bags in an upright position. Hangs single or dual-chamber blender bags vertically and allows bags to be inserted and removed easily without disturbing other samples. An integrated sealed basin contains spills. Ideal tool for storing samples while incubating. Ten closure clips are included and shipped with each storage rack.