The Azenta TubeMarker™ 2 is designed to directly print text, linear barcodes, 2D codes and graphics on plastic laboratory tubes using patent pending thermal pixel printing technology.
The low profile wells of this plate are shorter than "standard" profile wells, which decrease the "dead space" between the heated lid of the thermal cycler and the sample in the well. This eliminates condensation forming on the side wall of the tubes, preventing reduction in PCR volume and increasing the efficiency of the reaction. This is especially recommended for reaction volumes below 20 µl.
The rigid polycarbonate skirt of this design eliminates warping and distortion during PCR, meaning seal integrity is not compromised and less of your sample is lost through evaporation.
The low profile wells of this plate are shorter than "standard" profile wells, which decrease the "dead space" between the heated lid of the thermal cycler and the sample in the well. This eliminates condensation forming on the side wall of the tubes, preventing reduction in PCR volume and increasing the efficiency of the reaction. This is especially recommended for reaction volumes below 20 µl.
The rigid polycarbonate skirt of this design eliminates warping and distortion during PCR, meaning seal integrity is not compromised and less of your sample is lost through evaporation.
The low profile wells of this plate are shorter than "standard" profile wells, which decrease the "dead space" between the heated lid of the thermal cycler and the sample in the well. This eliminates condensation forming on the side wall of the tubes, preventing reduction in PCR volume and increasing the efficiency of the reaction. This is especially recommended for reaction volumes below 20 µl.
The rigid polycarbonate skirt of this design eliminates warping and distortion during PCR, meaning seal integrity is not compromised and less of your sample is lost through evaporation.
This non-skirted plate is designed to fit all major thermal cyclers and sequencers.
The rigid FrameStar® 2-component design eliminates warping and distortion during PCR, meaning seal integrity is not compromised and less of your sample is lost through evaporation.
This Adhesive Seal Roller & Adhesive Seal Applicator ensure even pressure is applied across the adhesive seal for a complete application to the plate.
FRAMESTAR 96, FULL SKIRTED, BLACK, CLEAR WELL, SINGLE BARCODE ON H1-H12 OF SKIRT 50/CS
FrameStar 96, Rigid Full Skirted, Black, Clear Well, Single Barcode on H1-H12 Side of Skirt, 50 plates/CS
A metal block with 96 aligned pins for piercing every well of a heat or adhesive sealed 96 well plate
This useful tool is a machine-engineered metal block with 96 pins aligned central to each well of a 96 well plate. The pierce plate's 96 pins pierce every well of a heat or adhesive-sealed 96 well PCR or microplate (pierceable seals only).
Enables instant access to samples with a single or multichannel pipette or automated system.
The 4s3 is a semi-automatic heat sealer which is compatible with a wide range of seals and plates of differing designs and heights.
The rapid heating element allows for a quick start up within minutes. The temperature is displayed in real time so that the heating up process can be monitored.
When the unit is left idle it automatically switches into standby mode, during which the temperature of the heating element is reduced to 60°C to save energy. When the sealer is left idle for longer periods it switches off automatically for added safety. The times at which the unit switches into standby and switch off modes can be adjusted to suit the user™s needs.
The 4s3 employs a unique and cost saving adapter system. Deep well plates and most other skirted plates can be sealed on the standard plate carrier (4ti-0615, supplied with the unit). For all 96 well PCR plates an additional plate carrier (4ti-0625, optional extra) must be used. Both plate carriers can also be combined for easier handling of shallow well plates such as 384 well PCR plates.
For better sealing of those films which have a tendency to curl, 4titude® offer sealing aids. A weighted platen (4ti-0602) for use with deep well blocks is provided with the unit and a sealing frame for use with all other plate designs is supplied when ordering the optional 4ti-0625 adapter.
The 4s3 has an RS-232 port to enable it to be integrated into most automated systems.
The following plate formats can be used with an appropriate holder:
This optically clear seal was specifically developed for optical applications, particularly qPCR. It is non sticky when removed from the packaging; this aids handling when wearing gloves. The adhesive is contained within small capsules, allowing light to pass through to ensure the optical clarity of the seal. When the seal is in position, pressure can be applied to burst the capsules, releasing a strong adhesive only where the seal touches the raised well rims of the plate - the rest of the seal area above the wells remains optically clear.
This is a pressure-activated seal. The adhesive is released when pressure is applied firmly and evenly to the seal. Our Adhesive Seal Roller is ideal for use with this product. We also recommend the use of our Optical Film Compression Pad during PCR with this product.
his ABI® Style PCR plate offers the benefits of our 2-component design to ABI® standard block users. This design combines the advantages of ultra-thin wall polypropylene tubes for optimum PCR results with a rigid polycarbonate skirt and deck for the highest thermal stability.
We recommend this semi-skirted plate for use with ABI® thermal cyclers and sequencers; it can be used directly with ABI® instruments with no adaptors necessary. The only case where this is not true is with the ABI Fast Block thermal cyclers; in which case using our FrameStar® FastPlate is recommended instead.
These Vari-Plate frames are moulded from rigid polycarbonate for use with our polypropylene Vari-Strips.
The Vari-Strips are inserted into the Vari-Plate frames to form a complete plate, part plate, or individual strip with an easy-to-handle frame.
As the Vari-Strips are interchangeable with the Vari-Plate frames, the frames themselves are re-useable; simply purchase more Vari-Strips to use.
Your message has successfully been sent. We will respond back soon
Email entered was invalid.
Name, Email, and your message are all required
On Thursday, May 2nd, we will be implementing a new phone system. During this time our system will be completely down. Please contact us at [email protected] and we will get back to you as soon as possible.
