68 Products found
Result 1- 24 of 68
Multiple Options

Embedding Base Molds

Simport® disposable base molds offer ease and convenience of operation. They are inexpensive enough to be discarded after use, yet strong enough to be reused. Thanks to the specially formulated plastic material, they offer excellent thermal exchange. They have a smooth interior finish and rounded corners facilitating specimen removal. Also, they are available in the same variety of sizes as metal molds and can be used with the same styles or types of cassettes and embedding rings. Each case contains two dispenser boxes of 500 base molds.

Download Embedding Base Molds Catalog Page


Multiple Options

Embedding Rings

Embedding Rings are suitable for holding and identifying tissue sample blocks and fit well in microtome chuck adapters. The etched writing surface on the ring is marked with an identification number and placed on top of the sample block. Additional paraffin is poured into the base mold to cement the ring onto the tissue block. The Embedding Ring securely holds the tissue sample in the microtome chuck adapter for sectioning, and then identifies the sample while in storage

Download M460 Disposable Embedding Rings Catalog Page


Multiple Options

Biopsy Foam Pads

Simport® biopsy foam pads are used to hold biopsies in place and prevent them from being lost during processing. They are made of a specially formulated foam which is always verified for consistency throughout in order to achieve optimum solvent flow. Biopsy samples are sandwiched between two foam pads and are placed either in tissue capsules or cassettes* with metal or plastic lids. M476-4 model is to be used with the MicromeshTM and SlimsetteTM Cassettes.

Download Biopsy Foam Pads Catalog Page


Multiple Options

Histosette® I Embedding and Biopsy Cassettes hold tissue specimens during processing, as well as in storage files. Molded from a special high density acetal polymer, these cassettes keep specimens safely submerged in liquid and are totally resistant to the chemical action of histological solvents. The efficient flow-through designs maximize fluid exchange and ensure proper drainage.

Tissue Processing Cassettes have slotted base and lid, whileBiopsy Cassettes feature fine perforations. The one-piece integral lid eliminates the need for separate steel lids. Just snap apart and conveniently lock the lid into the base of the cassette. They can be opened or closed as often as necessary and always relock securely without danger of specimen loss. Large labeling areas are located on three sides of the cassette. Wide anterior writing area at a 30° angle eases identification.

Disposable tissue plastic cassettes similar to Series M490 but specially designed to hold biopsy specimens during the embedding process, as well as in a storage file. Anterior writing area at a 30° angle. Not suitable for automated printers.

Cassettes are packaged in three dispenser boxes, with a total of 1500 per case.

Download Tissue and Biopsy Embedding Cassettes Catalog Page


Multiple Options

Microcentrifuge Tube with Pick-Up Tab

These tubes have all the fine features of the T330-7 series, but they also incorporates a convenient pick-up tabs for easier handling without actually touching the tube. Certified RNase-, DNase-, Pyrogen- and DNA-free.

Download Microcentrifuge Tube with Pick-Up Tab Catalog Page


Multiple Options

OneHand Microtube Rack

A newly designed microtube rack that can be used all around the lab. Although one of the most attractive racks available today, it offers all the advantages required by the modern laboratory. Made of highly resistant acetal polymer, it will not shatter or stain in contact with most laboratory chemicals. No coating to worry about, which can chip, peel or rust in a water bath.

The OneHand Microtube Rack is compact, lightweight and stackable in order to save as much space as possible. This is why it is ideal for incubators, refrigerators, freezers, under lab hoods and on bench tops. Not only is it submersible but will also sink and maintain stability without tipping over.

The OneHand  Microtube Rack is made of 2 tiers to facilitate the insertion and stability of microtubes. Now with one hand, you can easily unscrew just about any type of microcentrifuge tube with a screw-on closure. Thanks to an innovative locking system, the Simport self-standing Micrewtubes® will securely lock in each well of the base tier and will not turn. All models of microtubes made by various manufacturers will lock in the upper tier, thanks to a series of teeth grasping the collar of the microtube. Convenient handles on each side of the rack will ensure a safe grip when carrying it around. Interlocking feet allow safe stacking. Available in 5 attractive colors. Individually wrapped.

Download OneHand Catalog Page


Multiple Options

Simport Micrewtube®, O-Ring Seal Screw Cap

Made of durable polypropylene, these sterile printed screwcap tubes fit most rotors without adapters and withstand 18, 000 x g. The positive leakproof O-ring seals securely at temperatures from “285°F to 250°F (“196°C to 121°C). Clear caps are available with or without a tether. Printed graduations are permanent and a white writing space is provided. Inserts in five assorted colors are available separately.

T332 - With O-ring Seal Screw Cap and Atachment Loop

The washer seal secured in the top of the cap ensures a positive leakproof seal, time after time, keeping the integrity of small samples under even the most adverse conditions. This series of tubes is available either plain or with printed graduations and white marking area for sample identification. Caps are supplied with attachment loops, and allow them to remain attached to the tube in order to prevent mix-up and contamination. These microcentrifuge tubes have all the other fine features stated in the general description. Perfect for cryogenic work. Non skirted tubes can be centrifuged up to 20,000g. Skirted tubes can be centrifuged up to 17,000g. Will withstand temperatures from -196 °C to +121 °C.

T334 - Micrewtube® With O-Ring Seal Screw Cap

Similar to the T332 Series but without the tethered capť feature. This series of tubes is available either plain or with printed graduations and white marking area for sample identification. The caps do not have the attachment loops for users who prefer to remove the caps completely from the tubes when filling or sampling. These microcentrifuge tubes have all the other fine features stated in the general description. Perfect for cryogenic work. Non skirted tubes can be centrifuged up to 20,000g. Skirted tubes can be centrifuged up to 17,000g.


Multiple Options

StainTray Slide Staining System & Lids

Another user friendly approach to immunohisto-chemistry staining. This tray is also suitable not only for routine staining requiring a humid chamber but is also ideal for Hematology, Cytology and Microbiology laboratories. Manipulation is made safe and easy by using only one hand.

The StainTrayTM has a black base made of tough ABS plastic withstanding a wide range of chemicals ( Avoid chlorinated hydrocarbons ). It will accept up to 20 slides on four plastic rails covered with a polymer strip to perfectly hold slides even if tray is held at an angle. When humidity is needed, wells between rails will hold up to one ml of water securely without splashing. Middle wells will hold up to 2 ml each. Rails are raised not only to avoid water touching the slides but to make them more easily retrieveable. The base will also hold excess stain solution dripping from the slides. Four rubber feet ensure greater base stability. Units are stackable for space saving purposes.

Two covers are available: 1) A clear one allowing for visual examination. Made of PETG with a temperature range of -20 °C to +60 °C. 2) A black lid for fluorescent work. Made of ABS with a temperature range of -80 °C to +80 °C

Download StainTray Slide Staining System & Lids Catalog Page


Multiple Options

SlideFolder For Microscope Slide Storage

The SlideFolder will hold up to twenty standard microscope slides 75 mmx 25 mm  (3 x 1 in.) and is made of two parts: a base holding the slides horizontally offering numbered spaces for easy identification, and transparent doors which can either cover the slides or be swung behind the SlideFolder for space saving purposes.

The base is available in 5 different colors, allowing color-coding classification of the slides. Each slide location is identified with a number from 1 to 20. Removal of slides is made easy simply by pressing on one end, which will automatically lift the other end.

The two transparent hinged covers offer a full view of each slide without having to remove it from its position in the SlideFolder and allows easy reading of ID labels with or without an optical bar code reader. All units are stackable and take minimum space on laboratory tables or shelves. Will resist temperatures between -80 °C and +80 °C. Not autoclavable.

Download SlideFolder Catalog Page


Multiple Options

Organize and store microscope slides conveniently and easily with theSlideFile Slide Storage System. Each impact-resistant slide box can hold up to 400 1 x 3ť or 25 x 75mm slides, yet takes up only 105 cu. in. (1720 cm3). Each SlideFile slide box contains a removable tray with 100 individually numbered slots. Each slide is stored upright, on end, in its own slot. Sort quickly through slides by simply tilting them forwards and backwards with one finger, reading the slide labels, then easily remove the slides you need. Bar coded labels can be read without removing slides from tray. Double storage capacity by storing two slides per slot, or remove tray and line up 400 slides in three rows for long-term storage. Each slide box includes a transparent tinted cover for quick identification of contents and an unobstructed front writing surface for labeling. SlideFile boxes are stackable for space-efficient storage. Dimensions: 3-1/4 x 9-5/8 x 3-3/8ťH (82 x 245 x 86mm).

SlideFile Jr. is the same great system in a smaller size, with each box having 50 numbered slots and a total maximum capacity of 200 slides. Dimensions: 3-1/4 x 5-1/2 x 3-3/8ťH (82 x 140 x 86mm) and only 53 cu. in. (860cm3). Each SlideFile and SlideFile Jr. box comes with a white base. Other base colors are available. Contact customer service for ordering information. Two numbered index cards supplied with each box. SlideFile units are not autoclavable.


Multiple Options

UniMailer Slide Mailer

For many years now, noticeable improvements on the design of slide mailers have been scarce. Following many suggestions from users in the lab field, Simport® is now proud to come out with the UniMailer, a truly versatile model which can easily be used for handling and shipping one or as many slides as needed, while having to keep only one model in inventory.

The UniMailer is a one-slide tray allowing the use of as many as necessary according to the number of slides to be mailed. Not only do they fit snugly on top of each other but they are also secured by an innovative locking mechanism. You may also want to insert a tamper evident tie or attach an ID label.

Designed to accommodate 25 x 75 mm and 1 x 3 in. slides with or without cover glasses, they can also be used to provide safe storage for those valuable slides you want to protect. It provides for multiple reuse or single use disposability.

Each tray allows placing the slide in a horizontal position for full visibility. Slides can easily be inserted with an exact fit to avoid any breaking during transport. When pressed on either side while in the UniMailer, they will pop-up for easy removal.

Identification can be made on three sides or on top. Made of an almost unbreakable plastic, they are available in many popular pastel colors for easy identification. Packed in bag of fifty slide mailers. Will resist temperatures between -80 °C and +80 °C.

Dimensions: 89 x 29 x 6 mm H (3 1/2 x 1 3/8 x 1/4 in. H) 

Download UniMailer Slide Mailer Catalog Page


Multiple Options

Scintillation Vials 20 ml

This shoulderless vial features a full width opening of 23 mm for ease of access, a high degree of resistance to organic solvents, and sufficient translucence so that reagent levels or the presence of filter paper can be easily detected. The unique thread design of the closure allows the vial to be sealed, and opened with an easy 1/4 turn. The quality of the sealing system is such that it is not necessary to tighten the closure with a lot of pressure to achieve a leakproof seal. Polyethylene closure may not be autoclaved.

DownloadScintillation Vials Catalog Page


Multiple Options

This handy autoclavable rack can hold up to 50 cryogenic vials. Now with one hand, you can easily unscrew a Simport® Cryovial® closure. Thanks to an innovative universal locking system, the vials will securely lock in each well and will not turn. Each position is identified with an alphanumeric index. Strong handles make it easy and safe to carry. It is supported by anti-skid rubber feet. The rack is compact and stackable.

  • Made of Polypropylene
  • Colors - Blue, Red & Lilac
  • Sold as 4/Case

Download Cryovial® Workstation Rack Catalog Page


Multiple Options

Color coded inserts fit precisely into the cap of the Cryovial® for color identification.

  • Made of Polypropylene
  • Colors - White, Blue, Red, Green, Yellow, Tan, Gray, Lilac, Orange, Violet & Pink
  • Available in an Assortment of Colors - Yellow, Green, Red, Blue & White (100 of Each Color)

Download Capinsert Catalog Page


Multiple Options

Color your world with a wide variety of Cryostore Storage Boxes. Made of extra strong polycarbonate, these durable cryogenic storage boxes are designed to be used at temperatures between -196 °C and +121 °C and are autoclavable at 120 °C, 15 psig (1 bar) for 20 minutes.

A transparent cover allows the user to see the contents of the box, and is keyed to the base to prevent misalignment. Printed with a series of squares (numbered from 1 to 25, 1 to 42, 1 to 81, or 1 to 100), surface accepts writing with markers, facilitating inventory control.

A unique color coding system uses colored plastic grids to separate the cover from the base on the 25, 42 and 81-place boxes. Those made to accept 100 tubes (series 2100) have a colored base instead of a grid. Removal of vials facilitated by an innovative vial picker supplied with each storage box (not available with box T314-542). A choice of four popular pastel colors is available. Autoclavable.

Download Cryostore Storage Boxes Catalog Page


Multiple Options

50 ml Centrifuge Tubes

These centrifuge tubes are also useful for collecting and transporting biological specimens. Leakproof characteristics are ensured by a flat top plastic screw cap with an inner sealing lip. Tubes are made of translucent polypropylene or optically clear polystyrene with molded graduations from 2.5 to 50 ml. Polypropylene tubes can be autoclaved and will resist temperatures up to 121 °C; they will also resist acids, solvents and alkalies at room temperature.

They withstand centrifugation speeds of 3000g. Polystyrene tubes can tolerate aqueous solutions of mild bases or weak acids, but not organic solvents, aromatic or chlorinated hydrocarbons, and they cannot be autoclaved. They withstand centriguation speeds up to 1000g.

Download 50 ml Centrifuge Tubes Catalog Page


Multiple Options

Flange Plug Caps

These caps have two flexible flanges to ensure a leakproof seal. They will fit into test tubes and also in round cuvettes and centrifuge tubes.

Download Flange Plug Caps Catalog Page


Multiple Options

Micrewtube® With O-Ring Seal and Flat Screw Cap

Caps are screwed on and Non graduated

With O-Ring Seal and Flat Screw Cap

This series of tubes is also available either plain or with printed graduations and white marking area for sample identification. Washer seal screw caps are unattached but incorporate a flat top which provides a writing surface. These flat surfaced caps can be used with automatic capping machines in packaging industries. Closures are supplied in natural color. Perfect for cryogenic work. Non skirted tubes can be centrifuged up to 20,000g. Skirted tubes can be centrifuged up to 17,000g.  Will withstand temperatures from -196 °C to +121 °C.

Tubes and caps in the Micrewtube® Family are certified RNase, DNase, DNA and Pyrogen free.

Download Micrewtube® Catalog Page


Multiple Options

Amplitube PCR Reaction Strips

This more convenient 0.2 ml tube strip incorporates individually attached caps. No need to carry two separate components in inventory. The strip includes 8 integral 0.2 ml tubes with ultrathin sidewalls and bottoms for more uniform and efficient temperature transfer.

This PCR reaction strip is available with either flat (needle pierceable) or dome-topped individually attached hinged caps. While easily opened and closed with one hand, their positive sealing will fully protect the contents from evaporation during the whole thermal cycle. The cap has an integral seal preventing contamination with surface of lid.

While more easily handled than single tubes, the strip will precisely fit standard well spacing and can also be used with 8-channel hand-held pipettors. Manufactured under the most stringent conditions to attain the highest quality standards in the industry. Choice of colorless and four non-cytotoxic and non-metallic colors.  Packed in tamperproof resealable bags. 

Download Amplitube Catalog Page


Multiple Options

Specially formulated polypropylene vials that are designed for storing biological material, human or animal cells, at temperatures as low as -196 °C (but should be used only in the gas phase of liquid nitrogen). A silicone washer between cap and vial ensures a positive leakproof seal at all temperatures. A 1 1/4 turn of the cap is sufficient to seal the vial. Closure and vials are both manufactured of polypropylene with the same coefficient of expansion, ensuring an equally secure seal both at room temperature and at low cryogenic temperatures. Tubes have a white marking area, can be color coded with a CAPINSERT (Series T312) and are compatible with most storage systems. Only the round bottom vials can be centrifuged, and up to 17,000g. Sterilized by gamma radiation and packaged in unique tamperproof, resealable, safety-lock bags of 100. 

  • Volumes - 1.2, 2, 4 & 5 Mil
  • Self-Standing & Round Bottom
  • Autoclavable
  • Certified RNase, DNase, Pyrogen & DNA-Free
  • Sold as 100 Bag/1000 Case

Download Cryovial® Catalog Page


Multiple Options

Cryovial® Internal Thread Design with Silicone O-ring Seal

Designed for safe storage at temperatures as low as -196 °C (but should be used only in the gas phase of liquid nitrogen). Only 1 1/4 turn of the cap is sufficient to screw the cap on the vial. The specially formulated silicone o-ring ensures a positive leakproof seal at all temperatures. Closure and vial are both made of polypropylene having the same coefficient of expansion, ensuring an equally secure seal both at room temperature and at low cryogenic temperatures. Tubes have a white marking area, can be color coded with a CAPINSERTTM (Series T312) and are compatible with most storage systems. Only the non skirted vials can be centrifuged, and up to 17,000g. Sterilized by gamma radiation and packaged in unique tamperproof, resealable, safety-lock bags of 100. Autoclavable.

Certified RNase-, DNase-, Pyrogen- and DNA-free

Download Cryovial® Catalog Page


# R19-200

UniRack Jr. Rack for Tubes

This smaller model of the UniRackTM can hold up to 25 polystyrene or polyprolylene 10 and 12 mm tubes, such as 10 x 75 mm or 12 x 75 mm sizes. This rack will accommodate all types of screw cap microtubes from 0.5 to 2 ml made by manufacturers such as Simport®, Sarstedt, Nalgene, Bio-Plas, SSI, Sorenson etc... as well as 1 to 5 ml cryogenic vials. Flip the UniRackTM over and you can store up to 16 PCR or microcentrifuge tubes from 0.2 to 0.5 ml. Supplied without handles or anchor pins.

Download UniRack Jr. Rack for Tubes Catalog Page


# R19-355

MultiRack Tube Support System

The MultiRackTM is compact, lightweight and stackable in order to save as much space as possible. This is why it is ideal for incubators, refrigerators, freezers, under lab hoods and on bench tops. Not only is it submersible but will also sink and maintain stability without tipping over.

The MultiRackTM is made of three-tiers to facilitate the insertion and stability of tubes. The base tier has rounded wells with drain holes. Convenient handles on each side of the rack will ensure a safe grip when carrying it around. Interlocking feet allow stacking. Series S600-13 will accommodate all tubes up to a diameter of 13 mm while series S600-16 will accept tubes up to 16 mm in diameter including 15 ml centrifuge tubes. Model S600-30 is perfect for accommodating up to 18 x 50 ml centrifuge tubes. Autoclavable at 121 °C for 20 minutes. Available in five attractive colors.

Dimensions: 293 x 115 x 65 mm H   (11 1/2 x 4 1/2 x 2 1/2 in. H)

Download MultiRack Catalog Page


# R19-348

MultiRack Tube Support System

The MultiRackTM is compact, lightweight and stackable in order to save as much space as possible. This is why it is ideal for incubators, refrigerators, freezers, under lab hoods and on bench tops. Not only is it submersible but will also sink and maintain stability without tipping over.

The MultiRackTM is made of three-tiers to facilitate the insertion and stability of tubes. The base tier has rounded wells with drain holes. Convenient handles on each side of the rack will ensure a safe grip when carrying it around. Interlocking feet allow stacking. Series S600-13 will accommodate all tubes up to a diameter of 13 mm while series S600-16 will accept tubes up to 16 mm in diameter including 15 ml centrifuge tubes. Model S600-30 is perfect for accommodating up to 18 x 50 ml centrifuge tubes. Autoclavable at 121 °C for 20 minutes. Available in five attractive colors.

Dimensions: 293 x 115 x 65 mm H   (11 1/2 x 4 1/2 x 2 1/2 in. H)

Download MultiRack Catalog Page